What to do About a "U" (Unrecovered) Indicator

  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.
  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

JustFax

New member
Jun 29, 2024
2
0
The "Graphic Status Display" window shows one "U" (Unrecovered) marker. Does this mean that Spinrite automatically replaced that sector or group of sectors with good, readable sector(s), or do I need to do something to fix this problem with the drive? The "S.M.A.R.T. System Monitor" window shows a "raw data" figure of "11" for "uncorrectable" and "0138" for "write errors".
 
The U should mean that the data was lost, but not that the sector is unusable. If the sector is unusable, it would be marked 'B'. There is a command line option (by user request, including my own) that will prevent SpinRite from "clearing" an unrecoverable LBA, in the case you wanted to try a different utility with it, but this is off by default, and you'd need to specify it to have that happen.

You could double check me by running SpinRite again (do a partial pass maybe) (use SHIFT ENTER to specify start and stop sector or start and stop percentage, or use the command line.) The U shouldn't show on a second pass.

TL;DR: There is nothing further to do but to be aware you potentially lost some data.