What is wrong with these spinrite 6.1 command lines?

  • DNS Benchmark v2 is Finished and Available!
    Guest:
    That's right. It took an entire year, but the result far more accurate and feature laden than we originally planned. The world now has a universal, multi-protocol, super-accurate, DNS resolver performance-measuring tool. This major second version is not free. But the deal is, purchase it once for $9.95 and you own it — and it's entire future — without ever being asked to pay anything more. For an overview list of features and more, please see The DNS Benchmark page at GRC. If you decide to make it your own, thanks in advance. It's a piece of work I'm proud to offer for sale. And if you should have any questions, many of the people who have been using and testing it throughout the past year often hang out here.
    /Steve.
  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.

  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

P

pjfarley3

New member
Jun 22, 2025
4
0
C:>spinrite noramtest after level 2 port 3 dynastat 1 #3746969242 exit

C:>spinrite noramtest after level 2 port 3 dynastat 1 95.9033 exit

Both of those command lines result in spinrite not understanding command line options.

Please advise what I am doing wrong. I want to restart level 2 at sector 3746969242 on a 2TB WD drive attached to AHCI port 3 with only 1 minute dynastat attempts.

Peter
 
Last edited:
You must log in or register to reply here.

Similar threads

J
Issue with Spinrite 6.1 Rel 3 on HP w/ Legacy Bios option
Replies
1
Views
1K
SpinRite Problems & Solutions
DanR
D
G
Bug in SpinRite 6.1, Release 4 -- Percent Completed on Interruption
Replies
0
Views
1K
SpinRite Problems & Solutions
GreyHak
G
M
  • Contains 1 staff post(s)
SpinRite 6.1/R2 - U.2 Drive Attached With a M.2/U.2 Adapter Not Recognized
Replies
5
Views
2K
SpinRite Problems & Solutions
Steve
Steve
R
SpinRite 6.1 Release 4 does not finish initialization on an IBM Thinkpad 760XD
Replies
13
Views
2K
SpinRite Problems & Solutions
RickE
R
the_physio
  • Contains 30 staff post(s)
Issues running SpinRite 6.1 Rel 2 on Zimaboard
Replies
87
Views
16K
SpinRite Problems & Solutions
peterblaise
peterblaise
Top Bottom
Back