Spinrite 6.x Update ?

  • SpinRite v6.1 Release #3
    Guest:
    The 3rd release of SpinRite v6.1 is published and may be obtained by all SpinRite v6.0 owners at the SpinRite v6.1 Pre-Release page. (SpinRite will shortly be officially updated to v6.1 so this page will be renamed.) The primary new feature, and the reason for this release, was the discovery of memory problems in some systems that were affecting SpinRite's operation. So SpinRite now incorporates a built-in test of the system's memory. For the full story, please see this page in the "Pre-Release Announcements & Feedback" forum.
    /Steve.
  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.
  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

vajiggle

specified; this will replace the title
Sep 19, 2020
10
10
2020's Hellscape
Hello,

Haven't listened to a Security Now Pod in past months-x
can't find an (quick) update on forums

Could I get an update or link-to update.

Thank you ; )
 
Hello,

Haven't listened to a Security Now Pod in past months-x
can't find an (quick) update on forums

Could I get an update or link-to update.

Thank you ; )

SR 6.1 development updates are NOT posted here in the public forums.

You would need to go to the SpinRite Development NewsGroup for that. :)
 
  • Like
Reactions: vajiggle
@vajiggle You will probably need to wait another couple of months before the final SpinRite 6.1 debuts. At the time that it does, there should be a big splash on the GRC site, as well as here and presumably on the SN podcast. It will be a free update for existing users... you will need to have your code from your original purchase to get the update, so search your emails or whatnot to make sure you have that handy. (I believe there is a [manual] process on the GRC website you can invoke if you can't find it otherwise.)