Export thread

  • SpinRite v6.1 Release #3
    Guest:
    The 3rd release of SpinRite v6.1 is published and may be obtained by all SpinRite v6.0 owners at the SpinRite v6.1 Pre-Release page. (SpinRite will shortly be officially updated to v6.1 so this page will be renamed.) The primary new feature, and the reason for this release, was the discovery of memory problems in some systems that were affecting SpinRite's operation. So SpinRite now incorporates a built-in test of the system's memory. For the full story, please see this page in the "Pre-Release Announcements & Feedback" forum.
    /Steve.
  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.
  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

Spinrite 6 and Tivo Question

#1

michaelrowe01

michaelrowe01

Some years past I thought I had seen a story of someone using SpinRite to recover their TiVo. Well we have a TiVo and I've been using Spinrite for years, on my PC. I think it's about time to run it on my TiVo. Does anyone have experience doing this? I think our TiVo Roamio Plus, with a 500GB drive. We have a ton of shows on it that we've not yet watched, so we don't want to risk losing anything. Any pointers would be greatly appreciated. Thanks


#2

P

PHolder

You'll have to open it up and pull the drive out and stick it into something that can run SpinRite. Shouldn't be too challenging if you're good with a screw driver.


#3

rfrazier

rfrazier

Drain any static from your body before removing the drive. There is the possibility that SR can harm a drive if it's close to failing as it works them hard.

You'll have to determine the drive interface type.

Could be PATA:

Could be SATA:

Or something else. You could put the drive directly into your PC if you have the right ports and connections. Or you could look for hard drive caddy, enclosure, or hdd docking station on Best Buy or Amazon. You'll also need the proper interface to your PC if it's an external enclosure. USB 2 is dog slow. USB 3 is much better if your PC supports it. But, there are threads here on the forum about whether SR can recognize a USB drive and it's not guaranteed. It might work if the BIOS recognizes the drive.

If you get a double drive docking station like this,


you may be able to back up the drive with something like Terabyte Image for Windows which @Steve has recommended in the past. The docking station may come with software. Also, the maker of your target backup drive may provide software. Note that it's possible the Tivo would reject the copy though as everything in there is probably encrypted.

If you have a laptop and you don't mind removing the cover, and it has an optical disc player, you can replace that drive with something that holds a SATA HDD / SSD, like this:


If that link doesn't work, it's Amazon product number B01MRI8YFN.

You can also destroy your laptop that way if you're not careful.

Hope this helps.

May your bits be stable and your interfaces be fast. :cool: Ron


#4

Lob

Lob

If you rate the risk of losing shows due to pre-emptive maintenance, do nothing. I don't know how many shows you can get onto a 500Gb drive....

You probably have guides to clone the drive contents onto a bigger, new drive too. If you're taking it apart, improve it :) I did this years ago when I had Sky UK, I think it came with a 120Gb drive as default and I went to 500Gb. Pre-HD days.


#5

michaelrowe01

michaelrowe01

Thanks .. I figured it might be that easy, and I already have a 2 Disk external adapter that I use for running SuperDuper for my mac. Given the 500gb is doing well for us, I don't think it's worth upgrading the drive in the TiVo at this point.


#6

P

PHolder

2 Disk external adapter
What interface does it use? Since SpinRite ONLY runs under DOS, and in 6.0 only with BIOS, you need something that will be recognized in DOS mode by the machine you intend to run SpinRite on. If it's, say, USB, that can be problematic, depending on your BIOS. Most certainly we experienced that USB devices NEED to be present at BOOT in order to work in BIOS on many machines. (So connect the USB enclosure or whatever to the machine and then power it on, boot to DOS/SpinRite and hope it is detected and supported by your BIOS.)