Export thread

  • DNS Benchmark v2 Release 5 with Consultant License
    Guest:
    If you own any earlier release of our DNS Benchmark you may immediately download its release #5 replacement. Running an earlier release will detect the new release and help you upgrade.

    Although this release is cosmetic, appearance matters and affects ease of use. The biggest change, as seen in the image above, is that the DNS Benchmark now has a traditional Windows application menu to more fully expose its many features. This release is also "Consultant License Aware" and GRC will now issue a Consultant version when owners have previously purchased four "Personal Use" licenses. If you have previously purchased four DNSB licenses, or if you wish to upgrade your "Personal Use" license to Consultant, GRC's purchase process will direct you through that process.
    /Steve.
  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.
  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

Spinrite 6.1 "less sphincter pressure" switch?

#1

cpuguru

cpuguru

When evaluating a new drive or an old drive that I'm repurposing but want to do a sanity check on its health, I'd rather have Spinrite scan the drive but not beat itself up too much on trying to recover any data.

If a sector shows signs of being sketchy, I'd rather just have it blocked out and removed from service rather than SR spending any appreciable time trying to recover any underlying data.

Is there, or are there plans to implement a switch or menu option to put SR into a decreased sphincter pressure mode when scanning a drive?

Cheers!


#2

P

PHolder

Just run a level 1 scan. It won't fix any problems found, but will make the drive (and you) aware of them.


#3

cpuguru

cpuguru

I'd want it to do the whole read/write/reread/rewrite/reread process - I just wouldn't want it to spend a bunch of time trying to recover any data. If it fails I'd like the block marked as bad and move on.

Scanning some 4TB drives and most completed in less than 12 hours - this latest one has a few bad sectors apparently and Spinrite just churns away trying to recover data - which means it's been over 2 days so far.

Maybe a switch to abandon a sector if it hasn't been resurrected in x number of seconds?


#4

P

PHolder

I just wouldn't want it to spend a bunch of time trying to recover any data
Okay, for that, the new version (6.1 Alphas) has a command line option DYNASTAT. Pass it 0 and it won't try any recovery, or give it the number of minutes and seconds you want it to spend on each problem. (The seconds is a requested feature not implemented before Alpha 29.) The default is a max of 5 minutes, I believe.


#5

cpuguru

cpuguru

Okay, for that, the new version (6.1 Alphas) has a command line option DYNASTAT. Pass it 0 and it won't try any recovery, or give it the number of minutes and seconds you want it to spend on each problem. (The seconds is a requested feature not implemented before Alpha 29.) The default is a max of 5 minutes, I believe.
Excellent - just what I was looking for - plus I forgot about the Quiet switch - using that as well. Much appreciated!


#6

D

DanR

Excellent - just what I was looking for - plus I forgot about the Quiet switch - using that as well. Much appreciated!
Level 2 DynaStat 0

WARNING: DynaStat 0 is A DANGEROUS "pro option" which will turn off recovery and ONLY REWRITE damaged sectors without first attempting any recovery.


You can also use DynaStat 1, 2, 3, 4 for shorter time outs with potential data recovery. (The default is 5 seconds)