Export thread

  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.

  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

Slight variance on 1TB Samsung SSD 850 EVO in my Dell Latitude Laptop

#1

selwynpolit

selwynpolit

I'm curious why the different results for several different runs:



Code: 
  +--------------------------------------------------------------------------+
  | ReadSpeed: Hyper-accurate mass storage read-performance benchmark. rel 1 |
  |  Benchmarked values are in megabytes read per second at five locations.  |
  +--------------------------------------------------------------------------+

Driv Size  Drive Identity     Location:    0      25%     50%     75%     100
---- ----- ---------------------------- ------- ------- ------- ------- -------
81  1.0TB Samsung SSD 850 EVO 1TB       483.4   403.0   426.7   432.9   457.6

                  Benchmarked: Friday, 2020-12-25 at 22:49
-----------------------------------------------------------------------------

Driv Size  Drive Identity     Location:    0      25%     50%     75%     100
---- ----- ---------------------------- ------- ------- ------- ------- -------
81  1.0TB Samsung SSD 850 EVO 1TB       510.7   451.2   463.3   466.2   482.4

                  Benchmarked: Friday, 2020-12-25 at 22:51

Driv Size  Drive Identity     Location:    0      25%     50%     75%     100
---- ----- ---------------------------- ------- ------- ------- ------- -------
81  1.0TB Samsung SSD 850 EVO 1TB       516.4   461.8   475.0   476.0   491.6

                  Benchmarked: Friday, 2020-12-25 at 22:52

I was kinda imagining these would always produce consistent results. Do I need to reboot between tests? Perhaps some caching may be going on.

Selwyn


#2

Steve

Steve

Selwyn (@selwynpolit):

What we're learning is that SSDs have a LOT of “stuff” going on beneath the covers. I'll venture that if you were to turn off the machine and run the test again, you would see the results more like the 3rd time. With hard drives — which generally have much less “magic” going on — we tend to see rock solid numbers. And also with many SSD's. But your nice Samsung SSD might actually be changing some of its internals — such as learning which voltage thresholds to use for reading data — as a result of being asked to read.

There's a lot that we still don't know at this early stage.


#3

P

PHolder

In the bad old mainframe days, IBM used to rely on a system feature known as DFHSM (aka https://en.wikipedia.org/wiki/Hierarchical_storage_management ). Perhaps the drive, seeing some number of requests for certain sectors, assumes those sectors have become newly important to the end user, and decide to promote them to a position in a hierarchy that makes for faster access. As @Steve said, there really isn't any way for us to know what internal magic Samsung might be using.


Top Bottom
Back