Export thread

  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.
  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

Router notifications

#1

MichaelRSorg

MichaelRSorg

Steve mentioned on the last Security Now that routers can't nag their owners about an available firmware update. Some routers can send email messages.

My favorite router vendor, Peplink, does do email, but the router only notifies about connection errors, not about new firmware. According to their User Guide (see link) Synology can do both SMS and Email but the manual says it can only notify with traffic reports (Network Center > Traffic Control > Report) and system/connection errors (Control Panel > Notification) nothing about new firmware.
https://global.download.synology.co...re/SRM/1.2/enu/Syno_UsersGuide_Router_enu.pdf

Routers that are administered with mobile apps can, of course, notify in the mobile OS. In my experience, Eero notifies of new users but not of new firmware. Google Wifi notifies after it has installed new firmware, not before. Ubiquiti AmpliFi does not notify at all.

Anyone have good experiences with notifications from their routers?


#2

bobmcn

bobmcn

pfsense does email notifications. I have seen notifications for new devices requesting an IP address, dynamic DNS updates, and reboots. I don't know if new firmware causes a notification, I haven't had mine long enough to find out :)


#3

A

AlanD

I get notifications from my Fritz box when there is new firmware.


#4

MichaelRSorg

MichaelRSorg

pfsense does email notifications.
Can you customize the events that pfSense will notify you about?


#5

MichaelRSorg

MichaelRSorg

I get notifications from my Fritz box when there is new firmware.
I have hard good things about Fritz box routers, but they are barely sold in the US. Are you in the US?


#6

A

AlanD

I have hard good things about Fritz box routers, but they are barely sold in the US. Are you in the US?
No, I am in UK. It was supplied free by my ISP.

Seems quite good, 4 * 1GB ports, ADSL/VDSL modem, USB port and VOIP phone ports. Also has VPN server setup built in, but not activated, for remote access if required. The only thing that I have found is missing is that I can't broadcast the logfiles to my Syslog server.


#7

bobmcn

bobmcn

pfsense has an optional package called mailreport, that allows you to set up periodic e-mail reports containing command output and log file contents.


#8

MichaelRSorg

MichaelRSorg

My bad. I confused FritzBox with DrayTek whose routers are Vigor.


#9

A

AlanD

I have installed Draytek Vigor routers for a couple of customers. They are quite expensive, but full featured. In both cases they were also being used as VPN endpoints for remote staff to connect to the office. They do allow the log files to be broadcast on port 514 and collected by a Syslog server.

They also have multiple WAN inputs - RJ11 phone line for ADSL/VDSL, RJ45 for ethernet from a separate modem, and USB for failover access via cellphone network.


#10

C

CredulousDane

Got an ASUS router and have to check manually so it's a recurring event in my Todoist app. For a while, though, I had VisualPing setup to keep an eye on the router page on ASUS.com - and that worked well... until they removed that page completely. But I can recommend VisualPing for those who can find the firmware version / download page from their vendor.