news.grc.com connection refused

  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.
  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

dmot

Well-known member
Dec 6, 2020
49
10
I've been using XanaNews for a while and I just noticed that I can't grab new posts anymore. I get a socket error connection refused message. I was able to connect last week, tried today and I can't connect. I haven't changed anything on my end, does anyone else have the same issue? I tried from a second location with a second PC running the same news program so I'm not sure how I can be having the same issue on two different installs on two different WAN IPs.

Thanks.
 
FYI it's back now, and Steve posted this:


From: "Steve Gibson" <news008_@_grc.com>
Subject: News Server Outage
Date: Thu, 16 Jan 2025 11:04:21 -0800
Message-ID: <vmbl7f$1tl$1@GRC>
Lines: 27

Gang,

Just a note about this morning's news server outage. A thanks to
Paul Babiak for bringing this to my attention with an email that
came in here at 3:56am. I didn't see it until the morning, and I
was unable to the Level 3 data center until an hour ago.

The trouble MAY have been a flaky power supply. I haven't yet
plowed into logs, etc. since I wanted to get this posted first.
But when I arrived at Level 3, our news server was powered down
with a yellow "Alarm State" light glowing. So it appears that
the machine spontaneously powered itself down.

Examination of one of the two "redundant" power supplies
revealed that its power indicator LED had much reduced
intensity. I don't know whether that's significant, but when
I replaced the power supply with a spare I kept on hand, the
replacment's power supply's LED was full strength. So let's hope
that this was the problem (which does loosely fit the symptoms)
since it would be much more convenient to keep this server in
service as long as possible.

(And, no, the "redundancy failure" here does not go unnoticed!)
 
  • Like
Reactions: dmot
Dear Steve, I am in India on 17 Jan 25 at 8:45 in the evening. The newsgroup is not working. Connection is being refused and I searched for the problem and found this thread and so I am posting . News cannot be downloaded. Is there a Problem or a new authentication method that was changed recently.
--
Regards, Surya, VIsakhapatnam, India

1737127074556.png
 
Fri 17 Jan 2025 11:38:00 AM CST
Trying 4.79.142.203...
telnet: Unable to connect to remote host: Connection refused

Still down