Is pathetic NVMe speed expected in the SpinRite Benchmark?

  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.
  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

Festeron

New member
Oct 12, 2024
3
0
I was pleased to see benchmark numbers in the new SpinRite, but some of them are worrying. Is the horrible NVMe result simply because SpinRite is using the BIOS interface?

Also, because the SSD numbers are not wildly different, I shouldn't expect to see any dramatic difference in performance if I did a level 3 scan on it. Correct?

SizeTypeTechFrontMidEnd
500 GBSSDAHCI471569569
2 TBHard DriveAHCI14611966
8 TBHard DriveAHCI20418089
2 TBNVMeBIOS157159159
 
Yes, the NVMe numbers are what they are because: for any BIOS drive, the only thing that SpinRite can benchmark is the BIOS I/O speed. Where NVMe drives are concerned, SpinRite 6.1 does not have a native driver for NVMe. Hence accessing via the BIOS is the only option for SpinRite 6.1.

You are correct about the SSD. SpinRite should increase the 471 number to about 569. Not worth doing at this point.