Third party Coding the ESP32 with Visual Studio

  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.
  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

Duckpaddle

Well-known member
Oct 1, 2020
69
25
Great video about using Visual Studio to code and debug ESP32. Shows two tools I haven't heard of, Zadig for driver swaps on a Wintel and PlatformIO which extends VS to IOT devices.

Also the video starts with a "Dad" joke about programmers.

Dave's Garage does ESP32
 
I've been learning about and programming on the Raspberry Pico. It has a debugging solution using a Raspberry Pi and a physical serial link, but I haven't needed that level of debugging [yet]. It's kind of amazing how much power you can get in a $5 (or less) embedded controller these days.
 
  • Like
Reactions: Duckpaddle
I've been learning about and programming on the Raspberry Pico. It has a debugging solution using a Raspberry Pi and a physical serial link, but I haven't needed that level of debugging [yet]. It's kind of amazing how much power you can get in a $5 (or less) embedded controller these days.
I have programming since ASM on Z-80. I have gotten more joy from coding these little gadgets than any WinTel machine. Happy coding!