Export thread

  • DNS Benchmark v2 Release 5 with Consultant License
    Guest:
    If you own any earlier release of our DNS Benchmark you may immediately download its release #5 replacement. Running an earlier release will detect the new release and help you upgrade.

    Although this release is cosmetic, appearance matters and affects ease of use. The biggest change, as seen in the image above, is that the DNS Benchmark now has a traditional Windows application menu to more fully expose its many features. This release is also "Consultant License Aware" and GRC will now issue a Consultant version when owners have previously purchased four "Personal Use" licenses. If you have previously purchased four DNSB licenses, or if you wish to upgrade your "Personal Use" license to Consultant, GRC's purchase process will direct you through that process.
    /Steve.
  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.

  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

Any way to get SR6.1r4 to work on USB drives?

#1

Dibrom

Dibrom

Quick question (or two), about SR6.1r4. I have it working just fine for direct SATA adapter connected drives no problem. I do however also have a couple of drives which only have various versions of USB connector on them. One is a Mini-b USB and there are a few others that are Micro-B USB. Obviously with that connector only, I cannot connect them directly to the SATA ports on the MoBo for access under FreeDOS.

Is there any workaround or dodgy way of getting SR access to these sort of drives? Failing that, then is there an equivalent way of doing something similar under Hard Disk Sentinel v6.20 instead? I have both programs.


#2

ColbyBouma

ColbyBouma

If the drive is powered on and plugged into your computer before you boot into SpinRite, it's possible for SpinRite to see it. However, this is dependent on your BIOS. Not all of them are cooperative.


#3

Dibrom

Dibrom

Thank you for your reply. My USB ports are still powered and active with the main PSU powered even if the computer is not actually running, but I suspect that is not enough. I have tried booting into FreeDOS with the SR6.1 USB, but the drive scan doesn't find the USB connected drive, even though its bright blue light is on saying it's connected. Any idea what sort of setting to look for in BIOS? The computer is a Gigabyte GA-P55-UD3


#4

P

PHolder

It's complicated by the fact that nearly every BIOS/Motherboard combo is different/unique. On some systems, only certain USB ports or port types (such as USB 2 vs USB 3) are seen by the BIOS. I guess one suggestion is to boot into your BIOS with a drive connected in one port or the other and see if you can see it just inside the BIOS. (Probably under the boot selection screen or boot order screen, for example.) No guarantees even if it shows there that FreeDOS will also see it, but that's probably your best strategy.

It's also possible the the system may behave differently depending on if you reset it versus power it on from cold. So you may need to investigate that too.


#5

Dibrom

Dibrom

Thank you for the suggestions, yes that all makes sense. I am going to test all that and see if I can get it working. In particular I have only tested the drives connected to USB-3 ports and it makes a lot of sense that it's far likelier only the USB-2 ports will be active if any are at the early BIOS stages of boot up.

Edit: You were bang on 100% correct. I tried a USB-2 socket instead and BIOS could then read the drive at boot up. This however brought up another problem that sounds like there's no way around until SR v7.

Attachments


  • IMG_4155.JPG
    IMG_4155.JPG
    79.5 KB · Views: 323

#6

S

Scott

If you can’t get it to work natively, you could run SR under VirtualBox. You can map any drive type recognized by the host OS (including USB drives) to the virtual machine and SpinRite will see it. If you don’t need to scan your internal drives, just skip over the part about creating a boot drive and run VirtualBox under Windows, and then ONLY map the USB drives to the VM session.



Top Bottom
Back