A nice guide for everyone who needs a nudge to get into assembly programming

  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.
  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

mfalkvidd

IoT consultant
Sep 24, 2020
11
4
https://gaultier.github.io/blog/x11_x64.html is a beginner's guide to writing a Linux X11 gui in assembly. From the author's intro:
I wanted to expand my knowledge of assembly and by doing something fun and motivating. It all originated from the observation that so many program binaries today are very big, often over 30 Mib (!), and I asked myself: How small a binary can be for a (very simplistic) GUI? Well, it turns out, very little. Spoiler alert: around 1 KiB!​