10Gig Threat Management Gateway (TMG)

  • SpinRite v6.1 Release #3
    Guest:
    The 3rd release of SpinRite v6.1 is published and may be obtained by all SpinRite v6.0 owners at the SpinRite v6.1 Pre-Release page. (SpinRite will shortly be officially updated to v6.1 so this page will be renamed.) The primary new feature, and the reason for this release, was the discovery of memory problems in some systems that were affecting SpinRite's operation. So SpinRite now incorporates a built-in test of the system's memory. For the full story, please see this page in the "Pre-Release Announcements & Feedback" forum.
    /Steve.
  • Be sure to checkout “Tips & Tricks”
    Dear Guest Visitor → Once you register and log-in please checkout the “Tips & Tricks” page for some very handy tips!

    /Steve.

  • BootAble – FreeDOS boot testing freeware

    To obtain direct, low-level access to a system's mass storage drives, SpinRite runs under a GRC-customized version of FreeDOS which has been modified to add compatibility with all file systems. In order to run SpinRite it must first be possible to boot FreeDOS.

    GRC's “BootAble” freeware allows anyone to easily create BIOS-bootable media in order to workout and confirm the details of getting a machine to boot FreeDOS through a BIOS. Once the means of doing that has been determined, the media created by SpinRite can be booted and run in the same way.

    The participants here, who have taken the time to share their knowledge and experience, their successes and some frustrations with booting their computers into FreeDOS, have created a valuable knowledgebase which will benefit everyone who follows.

    You may click on the image to the right to obtain your own copy of BootAble. Then use the knowledge and experience documented here to boot your computer(s) into FreeDOS. And please do not hesitate to ask questions – nowhere else can better answers be found.

    (You may permanently close this reminder with the 'X' in the upper right.)

cpuguru

cpuguru

Active member
Sep 25, 2020
28
3
Aloha from Delaware!

My SonicWall TZ400 TMG is way past it's expiration date and I'm looking at finding/building something similar that can help add that layer of security between the internet and my servers.

The SonicWall allows for the creation of a transparent zone where the SonicWall answers for all of the public IPs behind it and let's me create block/allow rules for the servers based on whether they're a web server, a mail server, etc.

Best case scenario would be something that can handle 10G connectivity as I want to improve my server-to-server and server-to-NAS speeds by upgrading my switch to 10G ports and add 10G ethernet cards to the servers and Synologies.

Any thoughts on a possible solution?
 
You must log in or register to reply here.

Similar threads

Adam-TheMan-Tyler
  • Contains 1 staff post(s)
Router WAN Management over HTTPS
Replies
1
Views
504
Networking
Steve
Steve
C
Solution for pfSense and VPN client gateway randomness
Replies
3
Views
2K
Networking
Dave New
D
cpuguru
Xfinity Gateway with a single 2.5GB port
Replies
2
Views
4K
Networking
cpuguru
cpuguru
MichaelRSorg
Routers and privacy and cloud management
Replies
1
Views
1K
Networking
PHolder
P
P
Dnsmasq Vulnerabilities Threaten DNS Integrity
Replies
4
Views
2K
Networking
pmikep
P
Top Bottom
Back